View 310-010-6040G_101397.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Contents
Overview RDM D-Subminiature Connectors RDM 31 Series Contacts * Specifications & Interface Dimensions RDM 31 Series Contacts RDM Standard Series Contacts * Specifications & Interface Dimensions RDM Standard Series Contacts RDM-HF Series Contacts * Specifications & Interface Dimensions RDM-HF Series Contacts RDM 75 Ohm Contacts * Specifications & Interface Dimensions RDM 75 Ohm Contacts RDM High Power Contacts * Specifications & Interface Dimensions RDM High Power Contacts RDM High Voltage Contacts RDM 40 Series For DIN Style Housings * Specifications & Interface Dimensions RDM 40 Series For DIN Style Housings D-Subminiature Housings D-Subminiature Ordering Guide D-Subminiature Selection Guide D-Subminiature PCB Signal Contact Selection / Mounting Options D-Subminiature Guide Pin Plates D-Subminiature Shell Dimensions D-Subminiature Edge Mount Connectors / PC Board Footprints D-Subminiature Right Angle Mounting Dimensions D-Subminiature Printed Circuit Board Footprint Cable Reference Table Mounting Hole Layouts Cable Assembly Procedures Tools Other Product Offerings 33 34-35 36 37 38 39 40 41-76 77 78 79-88 89-90 91-92 4 5-8 9 10-14 15 16-19 20 21-24 25 26-27 28 29 30-32 2-3
While the information in this publication is believed to be accurate and reliable, all data presented is subject to change without notice. Winchester/Retconn disclaims responsibility for any damages resulting from application or any incompleteness or inaccuracies in the information presented. Consult factory for specific information on the latest design specifications.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/1
OVERVIEW * RDM Product Line
SERIES DESCRIPTION CENTER CONTACT OUTER BODY TYPICAL VIEW
14 20 21 22 23 24 26 27 28 29 30
DS/2
75 Ohm crimp similar to the Plug: Female Plug: Male Socket 24 Series. Specifically Receptacle: .040 designed for an AMP Receptacle: Female Dia. Male Pin housing. Standard Series; solder / crimp and solder / solder types. Rated to 900 MHz. Plug: Female Plug: Male Socket Receptacle: .040 Receptacle: Female Dia. Male Pin.
Similar to the 20 Series, thru Plug: Female Plug: Male Socket 50 Ohm. Popular with cellular manufacturers. Rated to Receptacle: .030 Receptacle: Female Dia. Male pin 2 GHz. High Power Contacts solder, crimp, and P.C. pin type. High Voltage Contacts, teflon bodies. NONE NONE Plug: Male Receptacle: Female
Plug: Female Plug: Male Socket Receptacle: .040 Receptacle: Female Dia. Male Pin
Plug: Female 75 Ohm crimp / crimp Plug: Male Socket popular with computer work Receptacle: .040 station manufacturers. Receptacle: Female Dia. Male Pin Standard series, crimp / Plug: Female Plug: Male crimp for flexible cable, solSocket der / solder for semi-rigid Receptacle: .040 Receptacle: Female cable. Rated to 1500 MHz. Dia. Male Pin Plug: Female Similar to the 20 Series, Plug: Male Socket except 75 Ohm impedance. Popular with CATV / Video Receptacle: .040 Receptacle: Female Dia. Male Pin applications. Similar to the 20 Series, except, fits into a DIN Housing. DIN 41612. Plug: Female Plug: Male Socket Receptacle: .040 Dia. Male Pin Receptacle: Female
Thru-50 crimp / crimp (cellu- Plug: Female Plug: Male lar mftr.) crimp / crimp for Socket flexible cable solder / sol- Receptacle: .030 der, for semi-rigid cables. Dia. Male Pin Receptacle: Female Plug: Female DIN Coax Contacts for DIN Plug: Male Socket Housings. 50 Ohm meet DIN Receptacle: .020 Specifications. Dia. Male Pin Receptacle: Female
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
OVERVIEW * RDM Product Line
SERIES DESCRIPTION CENTER CONTACT
Plug: Female Socket Receptacle: .040 Dia. Male Pin NONE NONE Plug: Female socket Receptacle: .015 Dia. Male Pin Plug: Female Socket Receptacle: .040 Dia. Male Pin
OUTER BODY
Plug: Male Receptacle: Female Plug: Male Receptacle: Female Plug: Male Receptacle: Female Plug: Male Receptacle: Female
TYPICAL VIEW
31 32 37 40
Blind Mate Contact, fits in standard housing. Rated to 5 GHz. Mates with PkZ. High Power Contacts, solder and crimp types for DIN housings. Similar to 22 Series. Similar to 30 Series, except 75 Ohms.
Similar to 31 Series fits in DIN housing.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/3
31 SERIES:
MECHANICAL:
Specifications & Interface Dimensions
ELECTRICAL:
Impedance: 50 Ohms Nominal Frequency Range: 0 to 5.0 GHz Insulation Resistance: 5000 Megaohms Minimum Contact Resistance: (Milliohms maximum) Center Contact: 5.0 Outer Contact: 3.0 Voltage Standing Wave Ratio: 0 to 5.0 GHz Straight Connector: 1.15 +.02F GHz on RG-316 Cable Straight Connector: 1.15 +.01F GHz on .141 Dia. Semi-Rigid Cable
Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies, Receptacles: Beryllium Copper per ASTM B196 Female Contacts: Beryllium Copper per ASTM B196 Male Contacts: Brass per ASTM B16, 1/2 HD Insulators: Teflon per ASTM D1710 Crimp Ferrule: Annealed Copper Alloy Clip Ring: Beryllium Copper per ASTM B194 Finish: Body: Gold Plated per MIL-G-45204 Center Contact: Gold Plated per MIL-G-45204 Clip Ring: Nickel Plated per QQ-N-290
ENVIRONMENTAL:
Operating Temperature: -55C to +125C Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition I Corrosion Resistance: MIL-STD-202, Method 101, Condition B
MATING CHARACTERISTICS:
Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 +.0001/-.0000 Dia. Pin and a 4 oz. Minimum Withdrawl on a .1500 +.0000/-.0001 Dia. Pin
Plugs, Center Contact: 31 Series Coaxial Contacts fit all D-Subminiature Connectors and 16 oz. Maximum Insertion on a .0410 +.0001/-.0000 Dia. Pin and are interchangeable with other manufacturer's product. Available a .5 oz. Minimum Withdrawl on a .0390 +.0000/-.0001 Dia. Pin in crimp or solder cable terminations. Retention in Shell: 15 lbs. Minimum
GENERAL INFORMATION:
Plug Interface
Receptacle Interface
Winchester/Retconn
DS/4
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM 31 SERIES:
Straight Plug
Printed Circuit Board Contacts
Part Number 310-010-6040G Mounting Hole N0. 060A
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Straight Receptacle
Part Number 311-010-6040G
Mounting Hole N0. 060A
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Right Angle Plug
Part Number 312-010-6040G
Mounting Hole N0. 060A
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Right Angle Receptacle
Part Number 313-010-6040G
Mounting Hole N0. 060A
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Straight Plug
Part Number 310-010-6140G
Mounting Hole N0. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/5
RDM 31 SERIES:
Straight Receptacle
Printed Circuit Board Contacts
Part Number 311-010-6140G Mounting Hole N0. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Right Angle Plug
Part Number 312-010-6140G
Mounting Hole N0. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Right Angle Receptacle
Part Number 313-010-6140G
Mounting Hole N0. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
RDM 31 SERIES:
Straight Plug
Crimp / Crimp, Flexible Cable
Part Number 310-910-0630G 310-910-0631G 310-910-1160G 310-910-1161G Cable RG- 316, 188 RG- 316 DS RG- 141, 58 RG- 142, 223 "A" DIM .93 .93 1.09 1.09 "B" DIM .067 .067 .120 .120
* See page 87 for cable assembly procedures: CAP 9-07 * Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
DS/6
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM 31 SERIES:
Straight Receptacle
Crimp / Crimp, Flexible Cable
Part Number 311-910-0630G 311-910-0631G 311-910-1160G 311-910-1161G Cable RG- 316, 188 RG- 316 DS RG- 141, 58 RG- 142, 223 "A" DIM .89 .89 1.05 1.05 "B" DIM .067 .067 .120 .120
* See page 87 for cable assembly procedures: CAP 9-07 * Part number shown is for standard gold plating.
Right Angle Plug
Part Number 312-910-0630G 312-910-0631G 312-910-1160G 312-910-1161G
Cable "A" DIM RG- 316, 188 .75 RG- 316 DS .75 RG- 141, 58 .75 RG- 142, 223 .75
"B" DIM .067 .067 .120 .120
"C" DIM .50 .50 .60 .60
* See page 88 for cable assembly procedures: CAP 9-16 * Part number shown is for standard gold plating.
Right Angle Receptacle
Part Number 313-910-0630G 313-910-0631G 313-910-1160G 313-910-1161G
Cable "A" DIM RG- 316, 188 .77 RG- 316 DS .77 RG- 141, 58 .77 RG-142, 223 .77
"B" DIM .067 .067 .120 .120
"C" DIM .50 .50 .60 .60
* See page 88 for cable assembly procedures: CAP 9-16 * Part number shown is for standard gold plating.
RDM 31 SERIES:
Straight Plug
Solder / Solder, Semi-Rigid Cable
Part Number 310-510-0850G 310-510-1410G Cable "A" DIM RG- 405 (.085 SR) .79 RG- 402 (.141 SR) .79 "B" DIM .090 .148
* See page 83 for cable assembly procedures: CAP 5-15 * Part number shown is for standard gold plating.
Straight Receptacle
Part Number 311-510-0850G 311-510-1410G
Cable "A" DIM RG- 405 (.085 SR) .75 RG- 402 (.141 SR) .75
"B" DIM .090 .148
* See page 83 for cable assembly procedures: CAP 5-15 * Part number shown is for standard gold plating. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/7
RDM 31 SERIES:
Right Angle Plug
Solder / Solder, Semi-Rigid Cable
Part Number 312-510-0850G 312-510-1410G Cable "A" DIM RG- 405 (.085 SR) .75 RG- 402 (.141 SR) .75 "B" DIM .090 .148 "C" DIM .31 .31
* See page 84 for cable assembly procedure: CAP 5-16 * Part number shown is for standard gold plating.
Right Angle Receptacle
Part Number 313-510-0850G 313-510-1410G
Cable "A" DIM RG- 405 (.085 SR) .77 RG- 402 (.141 SR) .77
"B" DIM .090 .148
"C" DIM .31 .31
* See page 84 for cable assembly procedures: CAP 5-16 * Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
DS/8
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM: Specifications & Interface Dimensions
MECHANICAL:
Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies, Receptacles: Beryllium Copper per ASTM B196 Female Contacts: Beryllium Copper per ASTM B196 Male Contacts: Brass per ASTM B16, 1/2 HD Insulators: Teflon per ASTM D1710 Crimp Ferrule: Annealed Copper Alloy Clip Ring: Phosphor Bronze per ASTM B103 Finish: Body: Gold Plated per MIL-G-45204 Center Contact: Gold Plated per MIL-G-45204 Clip Ring: Nickel Plated per QQ-N-290
ELECTRICAL:
Impedance: 50 Ohms Nominal Frequency Range: 0 to 900 MHz Insulation Resistance: 1000 Megaohms Minimum Contact Resistance: ( Milliohms Maximum) Center Contact: 5.0 Outer Contact: 3.0
ENVIRONMENTAL:
Operating Temperature: -55C to +125C Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition l Corrosion Resistance: MIL-STD-202, Method 101, Condition B
MATING CHARACTERISTICS:
Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 + .0001 / - .0000 Dia. Pin and a 4 oz. Minimum Withdrawl on a .1500 + .0000 / - .0001 Dia. Pin Plugs, Center Contact: 16 oz. Maximum Insertion on a .0410 + .0001 /- .0000 Dia. Pin and .5 oz. Minimum Withdrawl on a .0390 + .0000 / - .0001 Dia. Pin Retention in Shell: Plugs and Receptacles: 15 lbs. Minimum
GENERAL INFORMATION:
RDM Coaxial Contacts fit all D-Subminiature Connectors and are available in crimp or solder cable terminations.
Plug Interface
Receptacle Interface
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/9
RDM:
Solder / Solder, Semi-Rigid Cable
Part Number 201-510-0470G 201-510-0850G 201-510-1410G Cable .047 SR .085 SR .141 SR
Straight Receptacle
* See page 81 for cable assembly procedures: CAP 5-09 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Straight Plug
Part Number 200-510-0470G 200-510-0850G 200-510-1410G
Cable .047 SR .085 SR .141 SR
* See page 81 for cable assembly procedures: CAP 5-09 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Right Angle Receptacle
Part Number 203-510-0470G 203-510-0850G 203-510-1410G
Cable .047 SR .085 SR .141 SR
"A"DIM .29 .35 .35
* See page 82 for cable assembly procedures: CAP 5-10 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Right Angle Plug
Part Number 202-510-0470G 202-510-0850G 202-510-1410G
Cable .047 SR .085 SR .141 SR
"A"DIM .29 .35 .35
* See page 82 for cable assembly procedures: CAP 5-10 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
RDM:
Solder / Solder, Flexible Cable
Part Number 201-510-0360G 201-510-0630G 201-510-1070G 201-510-1160G 201-510-1161G Cable RG- 178, 196 RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223 "A" DIM .93 .93 1.03 1.03 1.03
Straight Receptacle
* See page 79 for cable assembly procedures: CAP 5-07 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C". Dimensions shown are in inches.
Winchester/Retconn
DS/10
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM:
Solder / Solder, Flexible Cable
Part Number Cable "A" DIM 200-510-0360G RG- 178, 196 .93 200-510-0630G RG- 316, 188 .93 200-510-1070G RG- 180, 195 1.03 200-510-1160G RG- 141, 58 1.03 200-510-1161G RG- 142, 223 1.03 * See page 79 for cable assembly procedures: CAP 5-07 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C". Part Number 203-510-0360G 203-510-0630G 203-510-1070G 203-510-1160G 203-510-1161G Cable "A" DIM RG- 178, 196 .49 RG- 316, 188 .49 RG- 180, 195 .49 RG- 141, 58 .49 RG- 142, 223 .49
Straight Plug
Right Angle Receptacle
* See page 80 for cable assembly procedures: CAP 5-08 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C". Part Number Cable "A" DIM 202-510-0360G RG- 178, 196 .49 202-510-0630G RG- 316, 188 .49 202-510-1070G RG- 180, 195 .60 202-510-1160G RG- 141, 58 .60 202-510-1161G RG- 142, 223 .60 * See page 80 for cable assembly procedures: CAP 5-08 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Right Angle Plug
RDM:
Solder / Crimp, Flexible Cable
Part Number 201-910-0360G 201-910-0630G 201-910-1070G 201-910-1160G 201-910-1161G Cable RG- 178, 196 RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223 "A" DIM .93 .93 1.03 1.03 1.03
Straight Receptacle
* See page 85 for cable assembly procedures: CAP 9-01 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C". Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/11
RDM:
Solder / Crimp, Flexible Cable
Part Number 200-910-0360G 200-910-0630G 200-910-1070G 200-910-1160G 200-910-1161G Cable RG- 178, 196 RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223 "A" DIM .93 .93 1.03 1.03 1.03
Straight Plug
* See page 85 for cable assembly procedures: CAP 9-01 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Right Angle Receptacle
Part Number 203-910-0360G 203-910-0630G 203-910-1070G 203-910-1160G 203-910-1161G
Cable RG- 178, 196 RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223
"A" DIM .49 .49 .60 .60 .60
* See page 86 for cable assembly procedures: CAP 9-02 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Right Angle Plug
Part Number 202-910-0360G 202-910-0630G 202-910-1070G 202-910-1160G 202-910-1161G
Cable RG- 178, 196 RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223
"A" DIM .49 .49 .60 .60 .60
* See page 86 for cable assembly procedures: CAP 9-02 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
RDM:
Crimp / Crimp, Flexible Cable
Part Number 261-910-0630G 261-910-1070G 261-910-1160G 261-910-1161G Cable RG- 316, 188 RG- 180, 195 RG- 141, 58 RG- 142, 223 "A" DIM .84 1.00 1.00 1.00
Straight Receptacle
* See page 87 for cable assembly procedures: CAP 9-07 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Straight Plug
Part Number 260-910-0630G 260-910-1070G 260-910-1160G 260-910-1161G
Cable "A" DIM RG- 316, 188 .86 RG- 180, 195 1.01 RG- 141, 58 1.01 RG- 142, 223 1.01
Dimensions shown are in inches.
* See page 87 for cable assembly procedures: CAP 9-07 * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Winchester/Retconn
DS/12
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM:
Printed Circuit Board Contacts
Part Number 201-010-6140G Mounting Hole NO. 061
Straight Receptacle
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Straight Plug
Part Number 200-010-6140G
Mounting Hole NO. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Right Angle Receptacle
Part Number 203-010-6140G
Mounting Hole NO. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Right Angle Plug
Part Number 202-010-6140G
Mounting Hole NO. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
RDM:
Same - Series Adapters
Part Number 201-201-0000G * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Receptacle / Receptacle
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/13
RDM:
Same - Series Adapters
Part Number 200-200-0000G * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
Plug / Plug
Plug / Receptacle
Part Number 200-201-0000G * Part number shown is for standard gold plating. * For military finish change suffix to "H". * For commercial finish change suffix to "C".
RDM:
Between Series Adapters
Part Number 200-350-0000H * Part number shown is for gold plating. * For nickel plate change suffix to "N"
RDM Plug / SMA Plug
RDM Receptacle SMA Jack
Part Number 201-351-0000H * Part number shown is for gold plating. * For nickel plate change suffix to "N"
RDM Receptacle SMA Plug
Part Number 201-350-0000H * Part number shown is for gold plating. * For nickel plate change suffix to "N"
RDM Plug / SMA Jack
Part Number 200-351-0000H * Part number shown is for gold plating. * For nickel plate change suffix to "N"
Dimensions shown are in inches.
Winchester/Retconn
DS/14
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM - HF:
MECHANICAL:
Specifications & Interface Dimensions ELECTRICAL:
Impedance: 50 Ohms Nominal Frequency Range: 0 to 1500 MHz Insulation Resistance: 1000 Megaohms Minimum Contact Resistance: (Milliohms Maximum) Center Contact: 5.0 Outer Contact: 3.0 Dielectric Withstanding Voltage (DWV): Straight: 1000 VRMS Right Angle: 800 VRMS Voltage Standing Wave Ratio: 1.15 Maximum from 0 to 1200 MHz 1.35 Maximum from 1200 to 1500 MHz
Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies, Receptacles: Beryllium Copper per ASTM B196 Female Contacts: Beryllium Copper per ASTM B196 Male Contacts: Brass per ASTM B16, 1/2 HD Insulators: Teflon per ASTM D1710 Crimp Ferrule: Annealed Copper Alloy Clip Ring: Phosphor Bronze per ASTM B103 Finish: Body: Gold Plated per MIL-G-4504 Center Contact: Gold Plated per MIL-G-45204 Clip Ring: Nickel Plated per QQ-N-290
MATING CHARACTERISTICS
Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 +.0001 / - .0000 Dia. Pin and a 4 oz. Minimum Withdrawl on a .1500 + .0000/ .0001 Dia. Pin Plugs, Center Contact: 16oz. Maximum Insertion on a .0410 + .0001 / - .0000 Dia. Pin and a 5 oz. Minimum Withdrawl on a .0390 + .0000 / - .0001 Dia. Pin Retention in Shell: 15 lbs. Minimum
ENVIRONMENTAL:
Operating Temperature: -55C to +125C Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition I Corrosion Resistance: MIL-STD-202, Method 101, Condition B
GENERAL INFORMATION:
RDM Coaxial Contacts fit all D-Subminiature Connectors and are interchangeable with other manufacturer's product. Available in crimp or solder cable terminations.
Plug Interface
Receptacle Interface
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/15
RDM - HF:
Straight Receptacle
Solder / Solder, Semi-Rigid Cable
Part Number 211-510-0470G 211-510-0850G 211-510-1410G Cable .047 SR .085 SR .141 SR
* See page 81 for cable assembly procedures: CAP 5-09 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Straight Plug
Part Number 210-510-0470G 210-510-0850G 210-510-1410G
Cable .047 SR .085 SR .141 SR
* See page 81 for cable assembly procedures: CAP 5-09 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Receptacle
Part Number 213-510-0470G 213-510-0850G 213-510-1410G
Cable .047 SR .085 SR .141 SR
"A" DIM .29 .35 .35
* See page 82 for cable assembly procedures: CAP 5-10 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Plug
Part Number 212-510-0470G 212-510-0850G 212-510-1410G
Cable .047 SR .085 SR .141 SR
"A" DIM .29 .35 .35
* See page 82 for cable assembly procedures: CAP 5-10 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
RDM - HF:
Straight Receptacle
Solder / Crimp, Flexible Cable
Part Number 211-910-0360G 211-910-0630G 211-910-1070G 211-910-1160G 211-910-1161G Cable "A" DIM RG- 178, 196 .93 RG- 316, 188 .93 RG- 180, 195 1.03 RG- 141, 58 1.03 RG- 142, 223 1.03
* See page 85 for cable assembly procedures: CAP 9-01 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C" Dimensions shown are in inches.
Winchester/Retconn
DS/16
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM - HF:
Straight Plug
Solder / Crimp, Flexible Cable
Part Number 210-910-0360G 210-910-0630G 210-910-1070G 210-910-1160G 210-910-1161G Cable "A" DIM RG- 178, 196 .93 RG- 316, 188 .93 RG- 180, 195 1.03 RG- 141, 58 1.03 RG- 142, 223 1.03
* See page 85 for cable assembly procedures: CAP 9-01 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Receptacle
Part Number 213-910-0360G 213-910-0630G 213-910-1070G 213-910-1160G 213-910-1161G
Cable "A" DIM RG- 178, 196 .49 RG- 316, 188 .49 RG- 180, 195 .60 RG- 141, 58 .60 RG- 142, 223 .60
* See page 86 for cable assembly procedures: CAP 9-02 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Plug
Part Number 212-910-0360G 212-910-0630G 212-910-1070G 212-910-1160G 212-910-1161G
Cable "A" DIM RG- 178, 196 .49 RG- 316, 188 .49 RG- 180, 195 .60 RG- 141, 58 .60 RG- 142, 223 .60
* See page 86 for cable assembly procedures: CAP 9-02 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
RDM - HF:
Straight Receptacle
Crimp / Crimp, Flexible Cable
Part Number 291-910-0630G 291-910-1070G 291-910-1160G 291-910-1161G Cable "A" DIM RG- 316, 188 .84 RG- 180, 195 1.00 RG- 141, 58 1.00 RG 142, 223 1.00
* See page 87 for cable assembly procedures: CAP 9-07 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/17
RDM - HF:
Straight Plug
Crimp / Crimp, Flexible Cable
Part Number 290-910-0630G 290-910-1070G 290-910-1160G 290-910-1161G Cable "A" DIM RG- 316, 188 .86 RG- 180, 195 1.01 RG- 141, 58 1.01 RG- 142, 223 1.01
* See page 87 for cable assembly procedures: CAP 9-07 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
RDM - HF:
Straight Receptacle
Printed Circuit Board Contacts
Part Number 211-010-6140G Mounting Hole N0. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Straight Plug
Part Number 210-010-6140G
Mounting Hole N0. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Receptacle
Part Number 213-010-6140G
Mounting Hole N0. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Plug
Part Number 212-010-6140G
Mounting Hole N0. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Dimensions shown are in inches.
Winchester/Retconn
DS/18
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM - HF:
Receptacle / Receptacle
Same - Series Adapters
Part Number 211-211-0000G * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Plug / Plug
Part Number 210-210-0000G * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Plug / Receptacle
Part Number 210-211-0000G * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/19
RDM 75 OHM:
MECHANICAL:
Specifications & Interface Dimensions ELECTRICAL:
Impedance: 75 Ohm Nominal Frequency Range: 0 - 2 GHz Insulation Resistance: 1000 Megaohms Minimum Contact Resistance: (Milliohms Maximum) Center Contact: 5.0 Outer Contact: 3.0 Dielectric Withstanding Voltage (DWV): Straight: 1000 VRMS Right Angle: 800 VRMS Voltage Standing Wave Ratio: 1.05 Maximum from 0 to 1000 MHz 1.25 Maximum from 1000 to 2000 MHz
Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies Receptacles: Beryllium Copper per ASTM B196 Female Contacts: Beryllium Copper per ASTM B196 Male Contacts: Brass per ASTM B16, 1/2/ HD Insulators: Teflon per ASTM D1710 Crimp Ferrule: Annealed Copper Alloy Clip Ring: Phosphor Bronze per ASTM B103 Finish: Body:Gold Plated per MIL-STD-45204 Center Contact: Gold Plated per MIL-STD-45204 Clip Ring: Nickel Plated per QQ-N-290
MATING CHARACTERISTICS:
Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 +.0001 / -.0000 Dia. Pin and 4 oz. Minimum Withdrawl on a .1500 +.0000 / -.0001 Dia. Pin Plugs, Center Contact: 16 oz. Maximum Insertion on a .0419 +.0001 / -.0000 Dia. Pin and 5 oz. Minimum Withdrawl on a .0390 +.0000 /-.0001 Dia. Pin Retension in Shell: 15 lbs. Minimum
ENVIRONMENTAL:
Operating Temperature: -55C to +125C Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition I Corrosion Resistance: MIL-STD-202, Method 101, Condition B
GENERAL INFORMATION:
RDM Coaxial Contacts fit all D-Subminiature Connectors and are interchangeable with other manufacturer's product. Available in crimp or solder cable versions.
Plug Interface
Receptacle Interface
Dimensions shown are in inches.
Winchester/Retconn
DS/20
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM 75 OHM:
Straight Receptacle
Solder / Solder, Semi-Rigid Cable
Part Number 271-510-0470G 271-510-0850G 271-510-1410G Cable .047 SR .085 SR .141 SR
* See page 81 for cable assembly procedures: CAP 5-09 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Straight Plug
Part Number 270-510-0470G 270-510-0850G 270-510-1410G
Cable .047 SR .085 SR .141 SR
* See page 81 for cable assembly procedures: CAP 5-09 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Receptacle
Part Number 273-510-0470G 273-510-0850G 273-510-1410G
Cable .047 SR .085 SR .141 SR
"A" DIM .29 .35 .35
* See page 82 for cable assembly procedures: CAP 5-10 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Plug
Part Number 272-510-0470G 272-510-0850G 272-510-1410G
DIM
Cable "A" DIM .047 SR .29 .085 SR .35 .141 SR .35
* See page 82 for cable assembly procedures: CAP 5-10 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
RDM 75 OHM:
Straight Receptacle
Solder / Crimp, Flexible Cable
Part Number 271-910-0630G 271-910-1070G Cable "A" DIM RG- 179 .93 BELDEN 8218 1.03
* See page 85 for cable assembly procedures: CAP 9-01 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/21
RDM 75 OHM:
Straight Plug
Solder / Crimp, Flexible Cable
Part Number Cable "A" DIM 270-910-0630G RG- 179 .93 270-910-1070G BELDEN 8218 1.03 * See page 85 for cable assembly procedures: CAP 9-01 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Receptacle
Part Number 273-910-0630G 273-910-1070G
Cable "A" DIM RG- 179 .49 BELDEN 8218 .60
* See page 86 for cable assembly procedures: CAP 9-02 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Plug
Part Number Cable "A" DIM 272-910-0630G RG- 179 .49 272-910-1070G BELDEN 8218 .60 * See page 86 for cable assembly procedures: CAP 9-02 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
RDM 75 OHM:
Straight Receptacle
Crimp / Crimp, Flexible Cable
Part Number 241-910-0630G 241-910-1070G Cable "A" DIM RG- 179 .84 BELDEN 8218 1.00
* See page 87 for cable assembly procedures: CAP 9-07 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Straight Plug
Part Number 240-910-0630G 240-910-1070G
Cable "A" DIM RG- 179 .86 BELDEN 8218 1.01
* See page 87 for cable assembly procedures: CAP 9-07 * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C" Dimensions shown are in inches.
Winchester/Retconn
DS/22
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM 75 OHM:
Straight Receptacle
Printed Circuit Board Contacts
Part Number 271-010-6140G Mounting Hole No. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Straight Plug
Part Number 270-010-6140G
Mounting Hole No. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Receptacle
Part Number 273-010-6140G
Mounting Hole No. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Plug
Part Number 272-010-6140G
Mounting Hole No. 061
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
RDM 75 OHM:
Receptacle / Receptacle
Same - Series Adapters
Part Number 271-271-0000G * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/23
RDM 75 OHM:
Plug / Plug
Same - Series Adapters
Part Number 270-270-0000G * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Plug / Receptacle
Part Number 270-271-0000G * Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Dimensions shown are in inches.
Winchester/Retconn
DS/24
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM HIGH POWER:
MECHANICAL:
Specifications & Interface Dimensions ELECTRICAL:
Current Rating: 10, 20, 40 AMPS Contact Resistance: 3.0 Milliohms
Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies Receptacles: Beryllium Copper per ASTM B196 Spring Washers: Phosphor Bronze per ASTM B103 Clip Ring: Phosphor Bronze per ASTM B103 Finish: Bodies: Gold Plated per MIL-STD-45204 Clip Ring: Nickel Plated per QQ-N-290
ENVIRONMENTAL:
Operating Temperature: -55C to +125C Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition I Corrosion Resistance: MIL-STD-202, Method 101, Condition B
MATING CHARACTERISTICS:
Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 +.0001 / -.0000 Dia. Pin and a 4 oz. Minimum Withdrawl on a .1500 +.0000 / -.0001 Dia. Pin Retention in Shell: 15 lbs. Minimum
GENERAL INFORMATION:
RDM Coaxial Contacts fit all D-Subminiature Connectors and are interchangeable with other manufacturer's product. Available in crimp or solder cable terminations.
Plug Interface
Receptacle Interface
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/25
RDM HIGH POWER:
Straight Receptacle
Solder, Flexible Cable
Part Number 221-510-0000G 221-510-0001G 221-510-0002G Wire Gauge #8 # 12 # 16 Current "A" DIM Rating 40 AMP .188 20 AMP .110 10 AMP .069
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Straight Plug
Part Number 220-510-0000G 220-510-0001G 220-510-0002G
Wire Gauge Current Rating "A" DIM #8 40 AMP .188 # 12 20 AMP .110 # 16 10 AMP .069
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Receptacle
Part Number
Wire Gauge 223-510-0000G # 8 223-510-0001G # 12 223-510-0002G # 16
Current "A" DIM Rating 40 AMP .188 20 AMP .110 10 AMP .069
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Plug
.365
Part Number 222-510-0000G 222-510-0001G 222-510-0002G
Wire Gauge Current Rating "A" DIM #8 40 AMP .188 # 12 20 AMP .110 # 16 10 AMP .069
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
RDM HIGH POWER:
Straight Receptacle
Crimp, Flexible Cable
Part Number 221-910-0000G 221-910-0001G 221-910-0002G Wire Gauge #8 # 12 # 16 Current Rating 40 AMP 20 AMP 10 AMP "A" DIM .188 .110 .069
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C" Dimensions shown are in inches.
Winchester/Retconn
DS/26
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM HIGH POWER:
Straight Plug
Crimp, Flexible Cable
Part Number 220-910-0000G 220-910-0001G 220-910-0002G Wire Gauge Current Rating "A" DIM #8 40 AMP .188 # 12 20 AMP .110 # 16 10 AMP .069
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Receptacle
Part Number 223-910-0000G 223-910-0001G 223-910-0002G
Wire Gauge #8 # 12 # 16
Current Rating 40 AMP 20 AMP 10 AMP
"A" DIM .188 .110 .069
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Plug
Part Number 222-910-0000G 222-910-0001G 222-910-0002G
Wire Gauge Current Rating "A" DIM #8 40 AMP .188 # 12 20 AMP .110 # 16 10 AMP .069
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
RDM HIGH VOLTAGE:
Straight Plug
Solder, Flexible Cable
Part Number 230-510-0000H Wire Gauge # 16
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Straight Receptacle
Part Number 231-510-0000H
Wire Gauge # 16
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/27
RDM HIGH VOLTAGE:
Right Angle Receptacle
Solder, Flexible Cable
Part Number 233-510-0000H Wire Gauge # 16
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Right Angle Plug
Part Number 232-510-0000H
Wire Gauge # 16
* Part number shown is for standard gold plating. * For military finish change suffix to "H" * For commercial finish change suffix to "C"
Dimensions shown are in inches.
Winchester/Retconn
DS/28
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
40 SERIES:
MECHANICAL:
Specifications & Interface Dimensions ELECTRICAL:
Impedance: 50 Ohms Nominal Frequency Range: 0 to 5.0 GHz Insulation Resistance: 5000 Megaohms Minimum Contact Resistance: (Milliohms Maximum) Center Contact: 5.0 Outer Contact: 3.0 Voltage Standing Wave Ratio: 0 to 5.0 GHz Straight Connector: 1.15 +.02F GHz on RG-316 Cable Straight Connector: 1.15 +.01F GHz on .141 Dia. Semi-rigid Cable
Materials: Bodies, Plugs: Brass per ASTM B16, 1/2 HD Bodies Receptacles: Beryllium Copper per ASTM B196 Female Contacts: Beryllium Copper per ASTM B196 Male Contacts: Brass per ASTM B16, 1/2 HD Insulators: Teflon per ASTM D1710 Crimp Ferrule: Annealed Copper Alloy Clip Ring: Beryllium Copper per ASTM B194 Finish: Body: Gold Plated per MIL-STD-45204 Center Contact: Gold Plated per MIL-STD-45204 Clip Ring: Nickel Plated per QQ-N-290
ENVIRONMENTAL:
Operating Temperature: -55C to +125C Vibration: MIL-STD-202, Method 204, Test Condition D Shock: MIL-STD-202, Method 213, Test Condition I Corrosion Resistance: MIL-STD-202, Test Method 101, Condition B
MATING CHARACTERISTICS:
Receptacles, Outer Contact: 3 lbs. Maximum Insertion on a .1530 +.0001 / -.0000 Dia. Pin and a 4 oz. Minimum Withdrawl on a .1500 +.0000 / -.0001 Dia. Pin Plugs, Center Contact: 16 oz. Maximum on a .0410 +.0001 / -.0000 Dia. Pin and 5 oz. Minimum Withdrawl on a .0390 +.0000 / -.0001 Dia. Pin Retension in Shell: 15 lbs. Minimum
GENERAL INFORMATION:
31 Series Coaxial Contacts fit housings per DIN 41612 Available in crimp or solder cable terminations
Plug Interface
Receptacle Interface
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/29
RDM 40 SERIES:
Straight Plug
Printed Circuit Board Contacts
Part Number Mounting Hole 400-010-6040G No. 060A * See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Straight Receptacle
Part Number 401-010-6040G
Mounting Hole No. 060A
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Right Angle Plug
Part Number 402-010-6040G
Mounting Hole No. 060A
* See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Right Angle Receptacle
Part Number Mounting Hole 403-010-6040G No. 060A * See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Straight Plug
Part Number Mounting Hole 400-010-6140G No. 061 * See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
DS/30
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
RDM 40 SERIES:
Straight Receptacle
Printed Circuit Board Contacts
Part Number Mounting Hole 401-010-6140G No. 061 * See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Right Angle Plug
Part Number Mounting Hole "A" DIM 402-010-6140G No. 061 .76 402-010-6141G No. 061 .86 * See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
Right Angle Receptacle
Part Number Mounting Hole 403-010-6140G No. 061 * See page 78 for mounting hole layout. * Part number shown is for standard gold plating.
RDM 40 SERIES:
Straight Plug
Crimp / Crimp, Flexible Cable
Part Number 400-910-0630G 400-910-0631G 400-910-1160G 400-910-1161G Cable "A" DIM RG- 316, 188 .93 RG- 316, DS .93 RG- 141, 58 1.09 RG- 142, 223 1.09 "B"DIM .067 .067 .120 .120
* See page 87 for cable assembly procedures: CAP 9-07 * Part number shown is for standard gold plating.
Straight Receptacle
Part Number 401-910-0630G 401-910-0631G 401-910-1160G 401-910-1161G
Cable "A" DIM RG- 316, 188 .86 RG-316, DS .86 RG-141, 58 1.02 RG- 142, 223 1.02
"B"DIM .067 .067 .120 .120
* See page 87 for cable assembly procedures: CAP 9-07 * Part number shown is for standard gold plating. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/31
RDM 40 SERIES:
Right Angle Plug
Crimp / Crimp, Flexible Cable
Part Number 402-910-0630G 402-910-0631G 402-910-1160G 402-910-1161G Cable "A" DIM RG- 316, 188 .75 RG- 316, DS .75 RG- 141, 58 .75 RG- 142, 223 .75 "B"DIM .067 .067 .120 .120 "C"DIM .50 .50 .60 .60
* See page 88 for cable assembly procedures: CAP 9-16 * Part number shown is for standard gold plating.
Right Angle Receptacle
Part Number 403-910-0630G 403-910-0631G 403-910-1160G 403-910-1161G
Cable "A" DIM RG- 316, 188 .71 RG- 316, DS .71 RG- 141, 58 .71 RG- 142, 223 .71
"B"DIM .067 .067 .120 .120
"C"DIM .50 .50 .60 .60
* See page 88 for cable assembly procedures: CAP 9-16 * Part number shown is for standard gold plating.
RDM 40 SERIES:
Straight Plug
Solder / Solder, Semi-Rigid Cable
Part Number Cable "A" DIM 400-510-0850G RG- 405 (.085 SR) .79 400-510-1410G RG- 402 (.141 SR) .79 "B"DIM .090 .148
* See page 83 for cable assembly procedures: CAP 5-15 * Part number shown is for standard gold plating.
Straight Receptacle
Part Number Cable "A" DIM 401-510-0850G RG- 405 (.085 SR) .72 401-510-1410G RG- 402 (.141 SR) .72
"B"DIM .090 .148
* See page 83 for cable assembly procedures: CAP 5-15 * Part number shown is for standard gold plating.
Right Angle Plug
Part Number Cable "A" DIM 402-510-0850G RG- 405 (.085 SR) .75 402-510-1410G RG- 402 (.141 SR) .75
"B"DIM .090 .148
"C" DIM .31 .31
* See page 84 for cable assembly procedures: CAP 5-16 * Part number shown is for standard gold plating.
Right Angle Receptacle
Part Number Cable "A" DIM 403-510-0850G RG- 405 (.085 SR) .69 403-510-1410G RG- 402 (.141 SR) .69
"B"DIM "C" DIM .090 .31 .148 .31
* See page 84 for cable assembly procedures: CAP 5-16 * Part number shown is for standard gold plating.
Dimensions shown are in inches.
Winchester/Retconn
DS/32
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE:
Connector Ordering Guide
Standard Housings
36
Example: RM2W7P-50-TD= 24W7 Male Housing, With Assembled Solder Cup Contacts, Tin Plated, With RFI Indents, And Standard Mounting
Edgemount D-Subminiature Connectors (RM - 2000 Series)
Note: Edgemount Coaxial Connectors are supplied installed in housing
Example: RM5W5P-2010-20= 5W5 Male Edgemount Housing, Tin Plated, Without RFI Indents, With RDM 20 Series Coaxial Connectors, For Use In A .030" Thick PC Board.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/33
D-SUBMINIATURE CONNECTOR:
Shell Size E
1W1 No. of size 8 contacts: 1 No. of size 20 contacts: 0
Selection Guide
5W1 No. of size 8 contacts: 1 No. of size 20 contacts: 4
2W2 No. of size 8 contacts: 2 No. of size 20 contacts: 0
3W3 No. of size 8 contacts: 3 No. of size 20 contacts: 0
Shell Size A
7W2 No. of size 8 contacts: 2 No. of size 20 contacts: 5
11W1 No. of size 8 contacts: 1 No. of size 20 contacts: 10
Shell Size B
4W4 No. of size 8 contacts: 4 No. of size 20 contacts: 0
5W5 No. of size 8 contacts: 5 No. of size 20 contacts: 0
9W4 No. of size 8 contacts: 4 No. of size 20 contacts: 5
13W3 No. of size 8 contacts: 3 No. of size 20 contacts: 10
17W2 No. of size 8 contacts: 2 No. of size 20 contacts: 15
21W1 No. of size 8 contacts: 1 No. of size 20 contacts: 20
Shell Size C
6W6 No. of size 8 contacts: 6 No. of size 20 contacts: 0
7W7 No. of size 8 contacts: 7 No. of size 20 contacts: 0
Winchester/Retconn
DS/34
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTOR:
Selection Guide
Shell Size C (Continued)
8W8 No. of size 8 contacts: 8 No. of size 20 contacts: 0
13W6 No. of size 8 contacts: 6 No. of size 20 contacts: 7
17W5 No. of size 8 contacts: 5 No. of size 20 contacts: 12
21WA4 No. of size 8 contacts: 4 No. of size 20 contacts: 17
21W4 No. of size 8 contacts: 4 No. of size 20 contacts: 17
25W3 No. of size 8 contacts: 3 No. of size 20 contacts: 22
27W2 No. of size 8 contacts: 2 No. of size 20 contacts: 25
Shell Size D
24W7 No. of size 8 contacts: 7 No. of size 20 contacts: 17
36W4 No. of size 8 contacts: 4 No. of size 20 contacts: 32
43W2 No. of size 8 contacts: 2 No. of size 20 contacts: 41
47W1 No. of size 8 contacts: 1 No. of size 20 contacts: 46
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/35
D-SUBMINIATURE:
PCB Signal Contact Selection
D-SUBMINIATURE:
0 - Standard
Mounting Options 2 - Float Mount Bushings
1 - 4-40 Clinch Nuts
6 - Swaged Stand-Offs
7- Swaged Stand-Offs With Guide Pins
* See page 40 for right angle mounting dimensions Dimensions shown are in inches.
Winchester/Retconn
DS/36
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE:
Guide Pin Plates
Male
Female
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/37
D-SUBMINIATURE:
Shell Dimensions
Plug Shell
Receptacle Shell
Rear Shell (Plug & Receptacle)
Securing Methods
Roll Over Tabs
Rivet
GENDER: P: Plug (Pin Signal Contacts) R: Receptacle (Socket Signal Contacts) Dimensions shown are in inches.
Winchester/Retconn
DS/38
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE:
Edgemount Connectors (Patent Information Pending)
See page 33 for part number selection.
PC BOARD FOOTPRINTS
(male footprint shown * female footprint is mirror image)
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/39
D-SUBMINIATURE:
Right Angle Power Contacts
Right Angle Mounting Dimensions
Right Angle Coaxial Contacts
Dimensions shown are in inches.
Winchester/Retconn
DS/40
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Viewed from component side of PCB. Male footprint shown. Female footprint mirrored.
2W2
Straight Coax Contacts
3W3
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint mirrored.
Viewed from component side of PCB. Male footprint shown. Female footprint mirrored.
4W4
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint mirrored.
5W5
Straight Coax Contacts
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/41
D-SUBMINIATURE CONNECTORS:
Footprints
6W6
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored.
7W7
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored.
8W8
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
5W1
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/42
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
7W2
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
11W1
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
9W4
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
13W3
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/43
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
17W2
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
21W1
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
13W6
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/44
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
17W5
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
21WA4
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/45
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
21W4
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
25W3
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/46
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
27W2
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
24W7
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/47
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
36W4
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
43W2
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/48
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
47W1
Straight Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/49
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
2W2
Right Angle Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
3W3
Right Angle Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
4W4
Right Angle Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
5W5
Right Angle Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/50
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTOR:
Footprints
Mating Face of Connector
6W6
Right Angle Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
7W7
Right Angle Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
8W8
Right Angle Coax Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
5W1
Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/51
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
7W2
Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
11W1
Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
9W4
Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
13W3
Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/52
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
17W2
Right Angle Coax Contacts
Footprints
Mating Face of Connector
Signal Contact Dia. .040 .030 .024
"D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
21W1
Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
13W6
Right Angle Coax Contacts Signal Contact Dia. .040 .030 .024 "D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
17W5
Right Angle Coax Contacts
Signal Contact Dia. .040 .030 .024
"D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored.
Winchester/Retconn
Dimensions shown are in inches.
DS/53
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
21WA4
Right Angle Coax Contacts
Signal Contact Dia. .040 .030 .024
"D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
21W4
Right Angle Coax Contacts
Signal Contact Dia. .040 .030 .024
"D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/54
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
25W3
Right Angle Coax Contacts
Signal Contact Dia. .040 .030 .024
"D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
27W2
Right Angle Coax Contacts
Signal Contact Dia. .040 .030 .024
"D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950* Internet: http://www.litton-wed.com
DS/55
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
24W7
Right Angle Coax Contacts
Signal Contact Dia. .040 .030 .024
"D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
36W4
Right Angle Coax Contacts
Signal Contact Dia. .040 .030 .024
"D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/56
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
43W2
Right Angle Coax Contacts
Signal Contact Dia. .040 .030 .024
"D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
47W1
Right Angle Coax Contacts
Signal Contact Dia. .040 .030 .024
"D" DIM. .055 MIN. .045 MIN. .040 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/57
D-SUBMINIATURE CONNECTORS:
Footprints
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
2W2
Straight Power Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
3W3
Straight Power Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
4W4
Straight Power Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
5W5
Straight Power Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/58
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
6W6
Straight Power Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
7W7
Straight Power Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
8W8
Straight Power Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/59
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
5W1
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
7W2
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
11W1
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
9W4
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored.
Dimensions shown are in inches.
Winchester/Retconn
DS/60
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
13W3
Straight Power Contacts
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
17W2
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
21W1
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/61
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
13W6
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
17W5
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
21WA4
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/62
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
21W4
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
25W3
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/63
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
27W2
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
24W7
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/64
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
36W4
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
43W2
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/65
D-SUBMINIATURE CONNECTORS:
Footprints
Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
47W1
Straight Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN.
Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/66
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
2W2
Right Angle Power Contacts Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
3W3
Right Angle Power Contacts Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
4W4
Right Angle Power Contacts Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
5W5
Right Angle Power Contacts Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/67
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
6W6
Right Angle Power Contacts Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
7W7
Right Angle Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
8W8
Right Angle Power Contacts Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/68
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS: Footprints
Mating Face of Connector Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
5W1
Right Angle Power Contacts
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
7W2
Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
11W1
Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/69
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
9W4
Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
13W3
Right Angle Power Contacts Signal Contact Dia. .040 .030 .024 "D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/70
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTOR:
Footprints
Mating Face of Connector
17W2
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
21W1
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
13W6
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/71
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
17W5
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
21WA4
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/72
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D- SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
21W4
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored.
Mating Face of Connector
25W3
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/73
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
27W2
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
24W7
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/74
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
D-SUBMINIATURE CONNECTORS:
Footprints
Mating Face of Connector
36W4
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Mating Face of Connector
43W2
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/75
D-SUBMINIATURE CONNECORS:
Footprints
Mating Face of Connector
47W1
Right Angle Power Contacts
Signal Contact Dia. .040 .030 .024
"D"DIM. .055 MIN. .045 MIN. .040 MIN.
Power Contact Dia. "P"DIM. .125 .144 MIN. .078 .098 MIN. Viewed from component side of PCB. Male footprint shown. Female footprint is mirrored. Dimensions shown are in inches.
Winchester/Retconn
DS/76
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
CABLE REFERENCE TABLE
CABLE RG-402 RG-405 CENTER CONDUCTOR .0359 .0201 O.D. DIELECTRIC .1175 .0658 O.D. JACKET .141 .086 IMPEDANCE (Ohms) 50 50
CABLE
RG-8A/U RG-9B/U RG-55 RG-58 RG-58A RG-59 RG-62 RG-62A RG-71 RG-140 RG-141 RG-141A RG-142 RG-174 RG-178 RG-179 RG-179B/U RG-180 RG-187 RG-187A/U RG-188 RG-188A/U RG-195 RG-196 RG-210/U RG-213/U RG-214/U RG-223 RG-303 RG-316 RG-316 DS
CENTER CONDUCTOR
.0285 .0285 .032 .038 .0071 .023 .025 .0253 .025 .025 .039 .0390 .039 .019 .012 .012 .0040 .012 .012 .0040 .020 .0067 .012 .012 .0253 .0296 .0296 .032 .039 .020 .020
O.D. DIELECTRIC
.285 .280 .116 .116 .116 .146 .146 .146 .146 .146 .116 .116 .116 .060 .034 .060 .063 .102 .060 .060 .060 .060 .102 .034 .146 .285 .285 .116 .116 .060 .060
O.D. SHIELD
.176 .150 .191 .191 .208 .176 .146 .171 .080 .054 .084 .124 .084 .081 .124 .054 .176 .146 .081 .102
O.D. JACKET
.405 .420 .176 .150 .195 .191 .191 .242 .208 .176 .146 .190 .171 .080 .054 .084 .100 .124 .084 .11 .081 .110 .124 .054 .242 .405 .425 .176 .146 .081 .102
IMPEDANCE (Ohms)
50 50 50 50 50 75 93 93 93 75 50 50 50 50 50 75 75 95 75 75 50 50 95 50 93 50 50 50 50 50 50
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/77
MOUNTING HOLE LAYOUTS
Number 060 A
Number 060 B
Number 060 C
Number 065
Number 066
Dimensions shown are in inches.
Winchester/Retconn
DS/78
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
CABLE ASSEMBLY PROCEDURES: 5-07
Part Numbers "A" Dim "B" Dim 200-510-0360G 201-510-0360G 1/4 5/16 200-510-0362G 201-510-0362G 9/32 7/32 200-510-0630G 201-510-0630G 1/4 5/16 200-510-1070G 201-510-1070G 5/16 3/8 200-510-1160G 201-510-1160G 5/16 3/8 "C" Dim 5/64 5/64 5/64 5/64 5/64
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/79
CABLE ASSEMBLY PROCEDURES: 5-08
Part Numbers "A" Dim "B" Dim 202-510-0360G 203-510-0360G 15/64 3/8 202-510-0630G 203-510-0630G 15/64 3/8 202-510-1070G 203-510-1070G 5/16 27/64 202-510-1160G 203-510-1160G 5/16 27/64 "C" Dim 1/16 1/16 3/32 3/32
Winchester/Retconn
DS/80
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
CABLE ASSEMBLY PROCEDURES: 5-09
Part Numbers "A" Dim "B" Dim 200-510-0850G 201-510-0360G 5/32 5/64 200-510-1410G 201-510-0630G 7/64 5/64 210-510-0850G 211-510-1070G 5/32 5/64 210-510-1410G 211-510-1160G 7/64 5/64 270-510-0850G 271-510-0850G 5/32 5/64 270-510-0850G 271-510-1410G 7/64 5/64
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/81
CABLE ASSEMBLY PROCEDURES: 5-10
Part Numbers "A" Dim "B" Dim 202-510-0360G 203-510-0360G 5/32 3/32 202-510-0630G 203-510-0630G 7/64 3/32 212-510-1070G 203-510-1070G 5/32 3/32 212-510-1160G 203-510-1160G 7/64 3/32 272-510-0850G 273-510-0850G 5/32 3/32 272-510-1410G 273-510-1410G 7/64 3/32
Winchester/Retconn
DS/82
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
CABLE ASSEMBLY PROCEDURES: 5-15
Part Numbers "A" Dim 310-510-0850G 311-510-0850G .020 310-510-1410G 311-510-1410G .025 400-510-0850G 401-510-0850G .020 400-510-1410G 401-510-1410G .025
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/83
CABLE ASSEMBLY PROCEDURES: 5-16
Winchester/Retconn
DS/84
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
CABLE ASSEMBLY PROCEDURES: 9-01
Part Numbers "A" Dim "B" Dim 200-910-0360G 201-910-0360G 1/4 5/16 200-910-0630G 201-910-0630G 1/4 5/16 200-910-1070G 201-910-1070G 5/16 3/8 200-910-1160G 201-910-1160G 5/16 3/8 "C" Dim 5/64 5/64 5/64 5/64
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/85
CABLE ASSEMBLY PROCEDURES: 9-02
Part Numbers "A" Dim "B" Dim 202-910-0360G 203-910-0360G 15/64 3/8 202-910-0630G 203-910-0630G 15/64 3/8 202-910-1070G 203-910-1070G 5/16 27/64 202-910-1160G 203-910-1160G 5/16 27/64 "C" Dim 1/16 1/16 3/32 3/32
Winchester/Retconn
DS/86
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
CABLE ASSEMBLY PROCEDURES: 9-07
Part Numbers 240-910-0630G 240-910-1070G 260-910-0630G 260-910-1160G 260-910-1161G 290-910-0630G 290-910-1160G 290-910-1161G 241-910-0630G 241-910-1070G 261-910-0630G 261-910-1160G 261-910-1161G 291-910-0630G 291-910-1160G 291-910-1161G Center Contact Only Crimp Tool Positioner Setting T2400 P0630 4 T2400 P0630 4 T2400 P0630 4 T2400 P0630 7 T2400 P0630 7 T2400 P0630 4 T2400 P0630 7 T2400 P0630 7
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/87
CABLE ASSEMBLY PROCEDURES: 9-16
Part Numbers "A" Dim "B" Dim 312-910-0630G 313-910-0630G .234 .312 312-910-0631G 313-910-0631G .234 .312 312-910-1160G 313-910-1160G .312 .375 312-910-1161G 313-910-1161G .312 .375 Ferrule Hex. Size .128 .151 .213 .213
Dimensions shown are in inches.
Winchester/Retconn
DS/88
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
Connector Tools
Crimp Tool (For HEX Dies)
Part Number T-1001
Die Set
Part Number T-1001-2 T-1001-3 T-1001-5
A HEX Length B HEX Length .128 .325 .105 .325 .213 .325 .178 .325 .314 .400 .155 .400
Note: To be used with crimp tool (T-1001)
Center Contact Crimping Tool
Part Number T-2400
Positioner
Part Number P0630 Note: To be used with center contact crimping tool (T-2400)
Dimensions shown are in inches.
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/89
Connector Tools
Contact Withdrawl Tool
Part Number T-1000
Tool For Inserting Stabilizing Ring Into Housing
Part Number T-1004
Insertion Tool Coax Contacts
Part Number T-1003
Dimensions shown are in inches.
Winchester/Retconn
DS/90
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
Other Product Offerings
Winchester/Retconn
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
DS/91
Other Product Offerings
Our Products are limited only by your imagination
Winchester/Retconn
DS/92
400 Park Road * Watertown, Connecticut 06795-5000 * Phone: (860) 945-5000 * FAX: (860) 945-3950 * Internet: http://www.litton-wed.com
Winchester/Retconn
Re-order Number: CAT-COMBO-D2000

▲Up To Search▲

Price & Availability of 310-010-6040G

	To Download 310-010-6040G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .